15 Amp - With Surge Protection Vertical Rack Mount - Outlet Strips

Path: Home > Outlet Strip Index > 15 Amp. - With Surge Protection - Vertical Rack Mount

• 1 5/8” x 1 3/8“ aluminum profiles with hardware included for mounting to rack cabinet Amhal Struts or open relay racks.
• Receptacles are 1” square and are equally spaced over the length of the power strip.
• Includes built in surge protection module
• With lighted on/off switch (or pilot light - see tables below) and 15 Amp. circuit breaker.
• Heavy 14 gauge wire cord - 14/3 SJTW for extreme temperature ranges and integral molded plug.
• Plug type available is a NEMA 5-15P straight blade (see picture below).
• For additional hardware kit, order part number 1585CLIP.
• These strips are also handy for work benches.
• Rated 15 amps, 120 volt.
• CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)
• UL listed, Standards UL1363, UL1449 and UL1283 - file # E166039
• NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
• NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts (see photos below).

With On/Off Switch & Surge Module

Part No.	Outlets	On-Off Switch	Cord Length	Plug Type	Strip Length	Reader File	Drawing File Size
1585H8A1S	8	Yes	6'	Straight	48"		49K
1585H8B1S	8	Yes	15'	Straight	48"		49K
1585H10A1S	10	Yes	6'	Straight	48"	NEW	-
1585H10B1S	10	Yes	15'	Straight	48"	NEW	-
1585H15A1S	15	Yes	6'	Straight	48"	NEW	-
1585H15B1S	15	Yes	15'	Straight	48"	NEW	-
1587H11A1S	11	Yes	6'	Straight	70"	NEW	-
1587H11B1S	11	Yes	15'	Straight	70"	NEW	-
1587H19A1S	19	Yes	6'	Straight	70"	NEW	-
1587H19B1S	19	Yes	15'	Straight	70"	NEW	-
1588H12A1S	12	Yes	6'	Straight	77"		50K
1588H12B1S	12	Yes	15'	Straight	77"		50K

---

With Pilot Light (No Switch) & Surge Module

Part No.	Outlets	On-Off Switch	Cord Length	Plug Type	Strip Length	Reader File	Drawing File Size
1585T8A1S	8	No	6'	Straight	48"		47K
1585T8B1S	8	No	15'	Straight	48"		47K
1585T10A1S	10	No	6'	Straight	48"	NEW	-
1585T10B1S	10	No	15'	Straight	48"	NEW	-
1585T15A1S	15	No	6'	Straight	48"	NEW	-
1585T15B1S	15	No	15'	Straight	48"	NEW	-
1587T11A1S	11	No	6'	Straight	70"	NEW	-
1587T11B1S	11	No	15'	Straight	70"	NEW	-
1587T19A1S	19	No	6'	Straight	70"	NEW	-
1587T19B1S	19	No	15'	Straight	70"	NEW	-
1588T12A1S	12	No	6'	Straight	77"		49K
1588T12B1S	12	No	15'	Straight	77"		49K

---

15 Amp Plug Type:

Straight Blade NEMA 5-15P

---

Mounting Features:

Mounting Clip Kit (Included)	Steel mounting clips (black) mount to rack cabinet struts, relay rack uprights or work bench. Mounting clip snaps around extrusion case of outlet strip. Included with all vertical rack mount strips. Includes three sets of hardware to mount to rack cabinet amhal struts (with spring nuts), relay rack uprights or a work bench (with wood screws). Additional kits can be purchased by ordering part number 1585CLIP
(click to enlarge)

---

Rack Cabinet Mount Notes:

(click to enlarge)

Allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts Maximum space required occurs when you are using a rear door and need access to rear panel rail holes with a wrench (see photo - left) Including the width of the outlet strip this would require a minimum of 4"

---

catalog pages on this series (101K) PB026-8.pdf

---

Order from your favorite distributor

HOME PAGE