Hammond Mfg. - "Classic" Push-Pull - Tube Output Transformers - (1608

"Classic" Audio
Push-Pull, Ultra-Linear
Tube Output

Path: Home > Transformer Index > Audio > "Classic" - Push-Pull - Ultra Linear - Tube Output

1650 Picture

Key Features:

Please see our NEW & improved versions (easy wire secondary series).
Designed for push-pull tube output circuits.
Enclosed (shielded), 4 slot, above chassis Type "X" mounting.
Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz) minimum.
Insulated flexible leads 8" min.
Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.
Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications (see hook-up diagrams below).
For the "ultimate" in Push-Pull output see our line of epoxy potted output transformers.

Part Number	Audio Watts (RMS)	Primary Impedance (Ohms)	Max. DC Per Side	Secondary Impedance (Ohms)	Weight (lbs.)
1608	10	8,000 ct	100 ma.	4-8-16	2.5
1609	10	10,000 ct	100 ma.	4-8-16	2.5
1615	15	5,000 ct	100 ma.	4-8-16	3.25
1620	20	6,600 ct	158 ma.	4-8-16	3.5
1650F	25	7,600 ct	128 ma.	4-8-16	4
1645	30	5,000 ct	128 ma.	4-8-16-70V	4.5
1650H	40	6,600 ct	200 ma.	4-8-16	6.5
1650K	50	3,400 ct	318 ma.	4-8-16	7
1650N	60	4,300 ct	318 ma.	4-8-16	8
1650P	60	6,600 ct	200 ma.	4-8-16	8
1650R	100	5,000 ct	318 ma.	4-8-16	12
1650T	120	1,900 ct	403 ma.	4-8-16	14
1650W	280	1,900 ct	806 ma.	4-8-16	28

Suggested Tube Types:

Part Number	Audio Watts (RMS)	Primary Impedance (Ohms)	Operation	Suggested Tube Types
1608	10	8,000 ct	Push-Pull (2 Tubes)	6AQ5, 6V6, 6BQ5, EL84, SV83
1609	10	10,000 ct	Push-Pull (2 Tubes)	6AQ5, 6V6, 6BQ5, EL84, SV83
1615	15	5,000 ct	Push-Pull (2 Tubes)	2A3, 6A3, 6AQ5, 6B4G, 6L6, 6V6
1620	20	6,600 ct	Push-Pull (2 Tubes)	6AQ5, 6L6, 6V6
1650F	25	7,600 ct	Push-Pull (2 Tubes)	6L6GC, 6V6, 807, 5881, EL34
1645	30	5,000 ct	Push-Pull (2 Tubes)	6L6GC, 6V6, 807, 5881, EL34
1650H	40	6,600 ct	Push-Pull (2 Tubes)	6L6GC, 807, 5881, EL34
1650K	50	3,400 ct	Push-Pull Par. (4 Tubes)	6L6GC, 807, 5881, EL34, 6146B, 6550B
1650N	60	4,300 ct	Push-Pull Par. (2 or 4 Tubes)	6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
1650P	60	6,600 ct	Push-Pull (2 Tubes)	6L6GC, 807, 5881, EL34, 6146B, 6550B, KT88
1650R	100	5,000 ct	Push-Pull Par. (2 or 4 Tubes)	807, 5881, EL34, 6146B, 6550B, KT88
1650T	120	1,900 ct	Push-Pull Par. (4 or 6 Tubes)	6L6GC, 5881, EL34, 6550B, KT88
1650W	280	1,900 ct	Push-Pull Par. (6 or 8 Tubes)	6L6GC, 5881, EL34, 6550B, KT88

Notes: The above examples of possible combinations are to help you narrow down the choices of transformers for your favorite tube types. How you operate the tubes (push-pull, push-pull parallel, ultra-linear, class, B+, bias, operating points, etc.) will change optimum plate to plate load impedance. Only a few of the most popular tubes are shown. As more tubes become available we will add them to the list.
A tube manual or tube manufacturer's technical data sheets should be consulted first, before making a decision on a proper output transformer.

Mechanical Data:

Part Number	Dimensions (Inches)
Part Number	A	B	C	D	E +/- 1/16"	G Slot
1608	2.5	2.75	3.06	2	1.69	.203 x .38
1609	2.5	2.75	3.06	2	1.69	.203 x .38
1615	2.5	3.25	3.06	2	2.19	.203 x .38
1620	2.5	3.5	3.06	2	2.44	.203 x .38
1650F	2.5	3.5	3.06	2	2.44	.203 x .38
1645	2.5	3.75	3.06	2	2.69	.203 x .38
1650H	3.13	4	3.81	2.5	2.69	.203 x .38
1650K	3.13	4	3.81	2.5	2.69	.203 x .38
1650N	3.13	4.25	3.81	2.5	2.94	.203 x .38
1650P	3.13	4.25	3.81	2.5	2.94	.203 x .38
1650R	3.75	4.25	4.56	3	3.06	.203 x .38
1650T	3.75	4.5	4.56	3	3.31	.203 x .38
1650W	4.38	7.5	5.25	3.5	5.88	.203 x .38

Schematic & Hook Up Data (all models except 1645 - see below):

***Secondary Connections***
(Due to the unique interleaving of the windings ***BOTH*** secondary windings must be engaged to meet specifications)

Please see our NEW & improved versions (**easy wire secondary series**).

Schematic & Hook Up Data (1645 only):

1645 Schematic

Secondary Connections (Due to the unique interleaving of the windings BOTH secondary windings must be engaged to meet specifications)
To hook up 4/8/16 ohm secondary loads - see "Secondary Connections" data below (do not use the white wire).
To hook up secondary to 70V loads, jumper Blk/Yel wire to Grn wire. Connect load to Blk and White wires.

Downloads

Catalog page(s) on JUST this series (432K)

Exactly what you are looking for???
Link to our stocking distributors - most have "on-line" pricing, stock check and ordering!!!

Order from your favorite distributor

Check out our "Classic" Product Distributors,
they specialize in this product...