Hammond Mfg. - "AUTO" Line Transformers (Step Up)

AUTOTRANSFORMERS
Plug - In - Step Up
(115VAC - 230VAC)

Path: Home > Transformer Index > Line > Autotransformer - Step Up - Plug In

(click to enlarge)

(click to enlarge)

Old Inventory

NEW Production

Key Features:

Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required.
World wide applications, 50 or 60 Hz. operation, step up (115VAC to 230VAC).
Input is circuit breaker protected.
Hi-pot tested to 2 KV RMS
Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).
Input is connected to a 5 foot cord & standard grounded North American plug (NEMA 5-15P)
Output is connected to a grounded European (Schuko) receptacle - NOTE: old inventory only.
Due to U.L changes in 2007 - NEW production with the European (Shuko) parts would no longer be U.L. listed. Therefore, we will be replacing this output receptacle with a standard North American 3-wire, 250V receptacle (NEMA 6-15R) after the first part of 2008.
North American Mark of Safety - C UL & UL listed (File #E211544)
Remember - These units do NOT convert line frequency

115VAC to 230VAC

Cat. No.	Capacity VA	Dimensions					Wt. Lbs.
Cat. No.	Capacity VA	A	B	C	D	E	Wt. Lbs.
176A	120	3.16	4.25	3.81	2.50	2.94	3.5
176B	200	3.16	4.50	3.81	2.50	3.19	4.5
176C	300	3.16	5.00	3.81	2.50	3.69	6.0
176D	500	3.80	6.00	4.68	3.00	4.38	10.0
176E	750	3.80	7.06	4.68	3.00	5.38	14.0
176F	1000	3.80	7.06	4.68	3.00	5.38	14.5
176G	1500	4.40	6.63	5.39	3.50	6.09	22.0

Mechanical & Schematic Data:

Downloads

Catalog page(s) on JUST this series (240K)

Exactly what you are looking for???
Link to our stocking distributors - most have "on-line" pricing, stock check and ordering!!!

Order from your favorite distributor


(click to enlarge)		(click to enlarge)
Old Inventory		NEW Production