ABS Plastic Hand Held/Instrument Enclosures (1593 Series)

Path: Home > Enclosure Index > ABS Plastic - Hand Held Instrument

click to enlarge

click to enlarge

click to enlarge

Key Features:

• Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
• Ergonomically designed for a comfortable fit into the user’s hand.
• Recessed top for membrane display or pad.
• Units with battery door use our long life "three snap" door.
• Lap joint construction provides protection against dust accumulation and splashing water.
• Molded in a choice of black or grey general purpose ABS plastic with a satin texture.
• Unit is secured with self tapping screws.
• Part numbers 1593NBK & 1593NGY are specifically designed for smart card readers
• Link here to photo tables of each part number (shown in grey)
  

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dwg File (zipped)	.dxf File Size	3D Solid Model .igs & .stp files (zipped)	3D .zip File Size	Removable Panels	Battery Door	Units	Length	Width	Enclosure Depth (assembled)
1593KBK 1593KGY	Black Grey		270K		232K		526K	2	No	Inches	2.6	2.6	1.1
										mm	66	66	28
1593JBK 1593JGY	Black Grey		260K		237K		447K	0	No	Inches	2.6	2.6	1.1
										mm	66	66	28
1593SBK 1593SGY	Black Grey		275K		205K		489K	1	Yes	Inches	3.6	2.6	0.83
										mm	92	66	21
1593PBK 1593PGY	Black Grey		275K		209K		522K	1	Yes	Inches	3.6	2.6	1.1
										mm	92	66	28
1593LBK 1593LGY	Black Grey		309K		230K		519K	2	No	Inches	3.6	2.6	1.1
										mm	92	66	28
1593NBK 1593NGY	Black Grey		307K		317K		504K	2	No	Inches	4.3	2.9	1.0
										mm	110	75	25
1593TBK 1593TGY	Black Grey		285K		214K		640K	1	Yes	Inches	4.4	2.6	0.83
										mm	112	66	21
1593QBK 1593QGY	Black Grey		293K		217K		596K	1	Yes	Inches	4.4	2.6	1.1
										mm	112	66	28
1593DBK 1593DGY	Black Grey		282K		250K		384K	2	No	Inches	4.5	1.4	1.0
										mm	114	36	25
1593YBK 1593YGY	Black Grey		292K		221K		587K	1	Yes	Inches	5.5	2.6	1.1
										mm	140	66	28
1593XBK 1593XGY	Black Grey		310K		225K		548K	2	No	Inches	5.5	2.6	1.1
										mm	140	66	28

Link here to photo tables of each part number (shown in grey)

• The 1593DBK , 1593DGY & 1593KBK, 1593KGY & 1593LBK, 1593LGY & 1593NBK, 1593NGY & 1593XBK, 1593XGY include two extra panels that are rounded to match profile of case.
• The 1593NBK, 1593NGY are designed to house smart card readers. These drawings (link buttons above), are larger than the others due to multi-page drawings.
• Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.

catalog pages on this series (195K) 9C-1593.pdf

Infared Panels:

• Infrared panels (to replace included panels) - Part Number 1593DIR10 (bag of 10). For model "D" only.
• Infrared panels (to replace included panels) - Part Number 1593NIR10 (bag of 10). For models "N" only.
• Infrared panels (to replace included panels) - Part Number 1593PIR10 (bag of 10). For models "K, L, P, Q, Y & X" only.
• Infrared panels (to replace included panels) - Part Number 1593SIR10 (bag of 10). For models "S & T" only.

click to enlarge

High quality FR4 glass epoxy board. Specifically designed to fit enclosures shown in the table below.(photo shows a 1593KPCB mounted in a 1593KGY). Mounting screws included Lead free, etched copper PCB (single sided) with a flux coating for easy soldering. 0.042" holes drilled on 0.1" centers. For more information link to the BPS (BusBoard Prototype Systems) website www.busboard.net. Part Number Use With Enclosures (above) BPS Part Number 1593KPCB 1593KBK, 1593KGY PR1593K 1593LPCB 1593LBK, 1593LGY PR1593L 1593PPCB 1593PBK, 1593PGY PR1593P 1593QPCB 1593QBK, 1593QGY PR1593Q

• Replacement assembly screws (fits 1593S & 1593T sizes ONLY) - self tapping, oval head type, #4 x 0.625” (15.9 mm)
  1593MS100 - Package of 100.
• Replacement assembly screws (fits 1593D, 1593J, 1593K, 1593L, 1593N, 1593P, 1593Q, 1593X & 1593Y sizes ONLY) - self tapping, oval head type, #4 x 0.75” (19.1 mm)
  1593QS100 - Package of 100.

---

Battery Holder Kits:

• Designed for our battery door enclosures.
• Kits include all the parts required to install the battery or batteries.
• Kit includes the battery holder, wires, divider and foam anti-rattle pad.

Part Number	Battery Holder Kit For:
BH1AAWKIT	1 AA Cell
BH2AAWKIT	2 AA Cells
BS61KIT	1 - 9V Cell

Link here for pictures & more details

---

Belt / Pocket Clip Option:

Molded from tough nylon (choice of Black or Grey). Includes 2 nylon screws (insulated to avoid internal interference). Mounting template included.   Black - Part Number 1599CLIP Grey - Part Number 1599CLIPGY

---

Order from your favorite distributor

Home | Products | Distributors | Technical | Contact Us | Other Options