ABS Plastic Hand Held/Instrument Enclosures (Translucent Blue - 1593 Series)

Path: Home > Enclosure Index > Translucent Blue ABS Plastic - Hand Held Instrument

click to enlarge

click to enlarge

Key Features:

• Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
• Ergonomically designed for a comfortable fit into the user’s hand.
• Molded in translucent blue ABS plastic (translucent to blue, white and near white LEDs, readouts & displays).
• Satin texture finish.
• Link here to the original 1593 series (in solid black & gray ABS).
• Recessed top for membrane display or pad.
• Units with battery door use our long life "three snap" door.
• Lap joint construction provides protection against dust accumulation and splashing water.
• Unit is secured with self tapping black screws.
• Part number 1593NTBU is specifically designed for smart card readers
• Link here to photo tables of each part number.
  

Part Number	Color	Reader File	AutoCAD .dwg File (zipped)	3D Solid Model .igs & .stp files (zipped)	Removable Panels	Battery Door	Units	Length	Width	Enclosure Depth (assembled)
1593KTBU	TransBlue	270K	232K	526K	2	No	Inches	2.6	2.6	1.1
							mm	66	66	28
1593JTBU	TransBlue	260K	237K	447K	0	No	Inches	2.6	2.6	1.1
							mm	66	66	28
1593STBU	TransBlue	275K	205K	489K	1	Yes	Inches	3.6	2.6	0.83
							mm	92	66	21
1593PTBU	TransBlue	275K	209K	522K	1	Yes	Inches	3.6	2.6	1.1
							mm	92	66	28
1593LTBU	TransBlue	309K	230K	519K	2	No	Inches	3.6	2.6	1.1
							mm	92	66	28
1593NTBU	TransBlue	313K	320K	438K	2	No	Inches	4.3	2.9	1.0
							mm	110	75	25
1593TTBU	TransBlue	285K	214K	640K	1	Yes	Inches	4.4	2.6	0.83
							mm	112	66	21
1593QTBU	TransBlue	293K	217K	596K	1	Yes	Inches	4.4	2.6	1.1
							mm	112	66	28
1593DTBU	TransBlue	282K	250K	384K	2	No	Inches	4.5	1.4	1.0
							mm	114	36	25
1593YTBU	TransBlue	292K	221K	587K	1	Yes	Inches	5.5	2.6	1.1
							mm	140	66	28
1593XTBU	TransBlue	310K	225K	548K	2	No	Inches	5.5	2.6	1.1
							mm	140	66	28

Link here to photo tables of each part number.

• The 1593DTBU, 1593KTBU, 1593LTBU, 1593NTBU & 1593XTBU include two extra panels that are rounded to match profile of case.
• The 1593NTBU is designed to house smart card readers.
• Due to their low profile design, the 1593STBU & 1593TTBU models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.

Infared Panels:

• Infrared panels (to replace included panels) - Part Number 1593DIR10 (bag of 10). For model "D" only.
• Infrared panels (to replace included panels) - Part Number 1593NIR10 (bag of 10). For models "N" only.
• Infrared panels (to replace included panels) - Part Number 1593PIR10 (bag of 10). For models "K, L, P, Q, Y & X" only.
• Infrared panels (to replace included panels) - Part Number 1593SIR10 (bag of 10). For models "S & T" only.

click to enlarge

High quality FR4 glass epoxy board. Specifically designed to fit enclosures shown in the table below (photo shows a 1593KPCB mounted in a 1593KTBU). Mounting screws included. Lead free, etched copper PCB (single sided) with a flux coating for easy soldering. 0.042" holes drilled on 0.1" centers. For more information link to the BPS (BusBoard Prototype Systems) website www.busboard.net. Part Number Use With Enclosures (above) BPS Part Number 1593KPCB 1593KTBU PR1593K 1593LPCB 1593LTBU PR1593L 1593PPCB 1593PTBU PR1593P 1593QPCB 1593QTBU PR1593Q

• Replacement black assembly screws (fits 1593STBU & 1593TTBU sizes ONLY) - self tapping, oval head type, #4 x 0.625” (15.9 mm)
  1593MS100BK - Package of 100.
• Replacement black assembly screws (fits 1593DTBU, 1593JTBU, 1593KTBU, 1593LTBU, 1593NTBU, 1593PTBU, 1593QTBU, 1593XTBU & 1593YTBU sizes ONLY) - self tapping, oval head type, #4 x 0.75” (19.1 mm)
  1593QS100BK - Package of 100.

---

Battery Holder Kits:

• Designed for our battery door enclosures.
• Kits include all the parts required to install the battery or batteries.
• Kit includes the battery holder, wires, divider and foam anti-rattle pad.

Part Number	Battery Holder Kit For:
BH1AAWKIT	1 AA Cell
BH2AAWKIT	2 AA Cells
BS61KIT	1 - 9V Cell

Link here for pictures & more details

---

Belt / Pocket Clip Option:

Molded from tough nylon (choice of Black or Grey). Includes 2 nylon screws (insulated to avoid internal interference). Mounting template included. Part Number Color Reader File AutoCAD .dxf File (zipped) 3D Solid Model .igs & .stp files (zipped) 1599CLIP Black 173K 109K 81K 1599CLIPGY Grey

---

Order from your favorite distributor

Home | Products | Distributors | Technical | Contact Us | Other Options