 |
Part Number 1421
(package of 4 screws & 4 metal cup washers)
- 10-32
x 0.625"
- Slotted oval head screws
- Steel cup washers (0.60" outside diameter)
- Nickel plated
|
|
 |
Part Number 1421A
(Package of 4 screws & 4 plastic cup washers)
- 10-32
x 0.625"
- Slotted & phillips combination oval head screws
- Nickel plated screws
- Black plastic cup washers (0.58"
outside diameter)
|
|
 |
Part Number 1421A25B (package of 25)
Part Number 1421A100B (package of 100)
- 10-32
x 0.625"
- Slotted & phillips combination oval head screws
- Nickel plated
|
|
 |
Part Number 1421ABK (package of 4)
Part Number 1421ABK25 (package of 25)
Part Number 1421ABK100 (package of 100)
- 10-32
x 0.625"
- Slotted & phillips combination pan head screws
- Black oxide finish
- Includes integral - factory installed,
mar resistant black nylon washer
- Saves installation time & panel space (required
when mounting multiple 1U (1.75") panels or 1U equipment close
spaced)
|
|
 |
Part Number 1421F25 (package of 25)
- 10-32
x 1.25"
- Phillips oval head screws
- Nickel plated
|
|
 |
Part Number 1421E25W (package of 25)
Part Number 1421E100W (package
of 100)
- Metal cup washers
- 0.60" outside diameter
- Use with 10-32 countersunk screws above
- Nickel plated
|
|
 |
Part Number 1421A25W (package of 25)
Part Number 1421A100W (package of 100)
- Black plastic cup washers
- 0.58" outside diameter
- Use with 10-32 countersunk screws above
|
|
 |
Part Number 1421B (package of 4 screws & 4 washers)
- 10-32
x 0.5" thumb screws
- With captivated nylon washers
- Nickel plated
- Works with panels up to 0.09" thick
- Head is 0.62" dia. x 0.37" high
|
|
 |
Part Number 1421C (package of 4 thumb nuts)
- 8-32
thumb nuts
- Knurled aluminum
- 0.64" head dia. x 0.45" high
|
|
 |
Part Number 1421D (package of 25)
- 10-32
x 0.5"
- Slotted & phillips combination pan head screws
- Use where economy is important OR for close
spacing. Example: multiple 1.75" (1U) panels are mounted next to
each other (as cup washers will interfere with each other)
- Zinc plated
|
|
 |
Part Number H1224S20 (package of 20)
- 12-24
x 5/8"
- Slotted & phillips combination pan head screws
- Zinc plated
- Used mainly on our Aluminum open relay racks (RRAL
series)
|
|
 |
USE
ON ROUND
HOLE RAILS ONLY
Part Number 1421N25 (package of 25)
Part Number 1421N100 (package
of 100)
- 10-32
clip nuts for punched (round) panel rails
- Has the holding strength of a 10-32 nut
- Black finish
|
|
 |
USE
ON ROUND
HOLE RAILS ONLY
Part Number 1421NP25 (package of 25)
Part Number 1421NP100 (package
of 100)
- 10-32
clip nuts for punched (round) panel rails
- Has the holding strength of a 10-32 nut
- Zinc plated
|
|
|
|
USE
ON SQUARE
HOLE RAILS ONLY
Part Number 1421CNA25 (package of 25)
Part Number 1421CNA100 (package
of 100)
- 10-32
cage nuts for square hole punched panel rails
- Has the holding strength of a 10-32 nut
- Zinc plated
|
|
|
|
USE
ON SQUARE
HOLE RAILS ONLY
Part Number 1421CNC25 (package of 25)
Part Number 1421CNC100 (package
of 100)
- 12-24
cage nuts for square hole punched panel rails
- Has the holding strength of a 12-24 nut
- Zinc plated
|
|
|
|
USE
ON SQUARE
HOLE RAILS ONLY
Part Number 1421CNB25 (package of 25)
Part Number 1421CNB100 (package
of 100)
- M6 cage
nuts for square hole punched panel rails
- Has the holding strength of a M6 nut
- Zinc plated
|
|
|
|
Part Number RCNIT
- Allows for easy installation of cage nuts in square
rail holes - a valuable tool.
- Spring steel tool
- Highly recommended, as square hole - cage nut hardware
is NOT easy to install
|
|
|
|
Part Number 1463S (package of 3 bolts, spring nuts
& washers)
- 3/8 x 16 spring loaded nuts (for Rack "C"
channels)
- 0.75" hex head bolts & washers
- used in all "C" series and REFK series rack
cabinets
- used to mount one rack rail (used in racks with Amhal
strut rail mounting)
- NOTE:
mounting hardware is included with panel rails
NOTE: This
hardware will NOT work on the smaller Amhal strut used in our desk top
RCHS & RCHV series - see below.
|
|
|
|
Extra
Spring Nuts - Part
Number 1421SN
- 1/4 - 20 Strut nut
- 1/4 - 20 x 1/2 bolt
- Used only in our RCHS
& RCHV table top rack cabinets
- handy for mounting of other equipment to the horizontal struts
- Sold in packages of 8 (8
spring nuts and 8 bolts) as shown
|