SOHO Knockdown Desk Rack Cabinets Server, Storage & Networking (RCSC Series)

Path: Home > Rack Index > SOHO Knockdown - Desk Rack Cabinets (RCSC Series)

(click to enlarge)

Features: Perfect for SOHO (Small Office, Home Office) applications for servers, storage & networking... Supplied unassembled (four cabinet pieces & four rails), requires only a phillips screwdriver to assemble... Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included) - see assembly instructions... Shipped in a flat pack container for handling ease & protection (see photo below)... Heavy duty, 16-gauge steel, 19” rack mount cabinet... 12U version is 25" high (fits under most desks)... Expandable in the future - easily stacks and/or gangs to other units (see accessories below). Requires baying kit (RCSCBAY) to lock cabinets together... Panel rails are infinitely adjustable (front to back), square hole punched for cage-nuts to full EIA hole centers (5/8 - 5/8 - 1/2 inch spacing)... Includes two pairs of rails (for rear support of heavier equipment), a starter pack of (50) 10-32 cagenuts & matching 1421ABK black screws... Overall width of 24” provides ample space for most cabling requirements... Generous cable-entry "punch-outs" with gasket strip material included... Optional doors (perforated to meet server manufacturers air flow requirements), fans and casters available... Front & back lip is .75" so usable depth is reduced by 1.5" Recommended maximum weight - 1,500 pounds... Rugged textured black powder paint finish.

24" Deep Models
(Maximum Mounting Depth = 23")

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Overall Height No Casters (Inches)
						Inches	Units
RCSC1902124BK1	Black		84K		98K	21.00	12	25
RCSC1904224BK1	Black		102K		128K	42.00	24	46

31" Deep Models
(Maximum Mounting Depth = 30.0")

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Overall Height No Casters (Inches)
						Inches	Units
RCSC1902131BK1	Black		86K		99K	21.00	12	25
RCSC1904231BK1	Black		97K		115K	42.00	24	46

36" Deep Models
* (Maximum Mounting Depth = 30.0")

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Overall Height No Casters (Inches)
						Inches	Units
RCSC1902136BK1	Black		87K		98K	21.00	12	25
RCSC1904236BK1	Black		99K		117K	42.00	24	46

* 36" deep models have extended cable space in the back

---

Key Feature:

Flat Pack Shipping       Shipped in a flat pack container for handling ease & protection... Perfect for tight access areas or 1 person installations... Rack is knocked down into 5 easy to handle parts (ie...two sides, top, bottom and a pack of 4 panel rails)...

(click to enlarge)

 

Accessories

(click to enlarge)	Perforated Locking Doors Doors are perforated to meet server manufacturer Free-Air-Ratio (FAR) requirements of 65%... Doors can be added later even if rack is fully loaded - as mounting uses a unique "snap-in" secure hinge mount from the outside... Rack assembly screws are behind the door for complete security... 16-gauge steel construction... Front & back of "RCSC" rack cabinet is pre-punched to accept these doors Mounts either right or left hand hinge (door & cabinet are symmetrical) Includes installed lock and two keys Finished in rugged textured powder paint Includes mounting hardware Part Number Color Reader File Drawing File Size AutoCAD .dxf File (zipped) .zip File Size Use With Cabinet Panel Height RCSC19021PDBK1 Black 36K 28K 21.00" (12 U) RCSC19042PDBK1 Black 36K 28K 42.00" (24 U)
(click to enlarge)	Casters - Part Number 1425P SOLD IN A SET OF 4 Light Duty 400# Mfg's specified weight capacity (Set of 4) Twin nylon swivel wheels with zinc axles and hoods 5/16 - 18 threaded stem mounts into existing holes in base of RCSC (knockdown) rack Wheels are black & 2.37" wheel diameter Final mounting height of 2.75"
(click to enlarge)	Casters - Part Number 1425BH SOLD IN A SET OF 4 Heavy Duty 1,050# Mfg's specified weight capacity (Set of 4) Features ball bearing swivel and hard composition wheels Standard 3" x 1.75" hole mounting pattern Wheels are blue & 3" wheel diameter Includes mounting hardware Adds 3.75" to the overall height of the cabinet
(click to enlarge)	Baying Kit - Part Number RCSCBAY Required to connect 2 RCSC cabinets together Can be used to stack vertically or gang horizontally Includes mounting hardware
Part Number Description Instructions RCSCFAN Fan Kit includes two fans and power cord mounts into knockout spaces provided in the RCSC frame - RCSCATIP Anti-Tip Kit brackets mount to front (or back) used when heavy slide out servers/equipment are installed

Accessory Links:

• Aluminum rack panels (PBPA series)
• Steel rack panels (PBPS series)
• Formed steel rack panels (PBFS series)
• Ventilated & Access Panels (Louvers, slots, baffles etc.)
• Doors & Chassis - Panel Mount (Hinged & fixed)
• Cable Organizing (Panel mount rings, velcro strap panels & guides)
• Shelves - Panel Mount (Fixed, solid & vented)
• Shelves & Slides - Dual Vertical Rail Mount (Fixed, pull out, solid & vented, drawers, etc.)
• Keyboard Shelves & Drawers (Vertical rail mount)
• Rack mount power bars (1582 & 1583 series)
• Cooling Accessories (Fan Panels, Fans, Grills & Baffles)
• Blowers (HB series)
• Fan Trays (FT series)
• Mounting hardware (Hardware)

Order from your favorite distributor