Fan Panel

• Create your own 19" rack mount fan or filter fan panels
• Accepts standard square fans (available below or use your own)
• For a filter fan panel use our filter fan grills below
• Perfect for an intake fan panel. When using "push-pull" cooling use the fan grill panel below for exhaust
• Rugged textured black powder paint
• Requires mounting hardware
• Control your rack temperature with our economical, compact thermostat

Fan Grill Panel

• Create your own 19" rack mount fan panels
• Accepts standard square fans (4.7" available below or use your own)
• Perfect as an exhaust fan panel when using "push-pull" cooling. Use the fan panel above, with filter grills for intake
• Rugged textured black powder paint finish
• Requires mounting hardware
• Control your rack temperature with our economical, compact thermostat

Fan Panel Assembly - Part No. PPGPFPA

• Mounted on a standard width 19" rack panel
• 3U (5.25") panel height
• Two standard 115VAC (105 CFM) square fans (4.7") installed and wired
• Perfect as an exhaust fan panel when using "push-pull" cooling (ie..unit pulls air out of the rack cabinet)
• Rugged textured black powder paint finish
• Requires mounting hardware
• Control your rack temperature with our economical, compact thermostat

Filter Fan Grills

• Create your own filter fans or exhaust grills
• Mounts easily with 4 screws using template and hardware provided.
• Complete with flame retardant ABS plastic grill and flame retardant synthetic filter.
• Integral gasket on reverse side of grill, seals against mounting surface.
• Hole cutout is NOT critical as rear of filter grill seals to surface (see rear photo below)
• Can be used with standard 3.15" or 4.7" square fans (available below or use your own) or alone as as exhaust grill
• Molded in a choice of 3 colors to match our racks & accessories

(Click to enlarge)

Part Number	Color	Grill Size		Template Reader File	Drawing File Size	Use With Square Fan Size
		H	W
XPFA80BK XPFA80CG XPFA80GY	Black Gray/Beige ASA 61 Gray	4.13"	4.13"		18K	3.15"
XPFA120BK XPFA120CG XPFA120GY	Black Gray/Beige ASA 61 Gray	5.91"	5.91"		17K	4.70"

Photo Features:

(Click to enlarge)	(Click to enlarge)
Open Photo (Front, Back & Filter)	Rear Photo

---

Replacement Filters (5 per pack)

Part Number	Filter Media Data	Drawing File Size	Use With Square Fan Size
PFF1000		257K	3.15" (XPFA80 series)
PFF2000			4.7" (XPFA120 series)

Fans (Tubeaxial)

• Choice of 4.70" (120mm) or 3.15" (80mm)
• 1.50" deep
• Choice of either 115 or 230 VAC, 50/60 Hz.
• Impedance protected motor
• Class-B insulated
• Ball bearing construction, metal blades
• Diecast aluminum body
• Rotation is counter clockwise (looking at the rotor - as pictured)
• Airflow is over the struts (out the back as pictured)
• 4.70" (120 mm) fans have male plug terminations (requires fan cords below)
• 3.15" (80 mm) fans have 11" long lead wires
• UL recognized, CSA listed, CE certified
• With mounting hardware

Baffle Panel

• Standard 19" rack mount
• Rear sloping baffle for directing air flow
• Steel construction
• Shown here upside down, to show construction
• Extends apx. 14" behind panel rails
• Rugged, heat absorbing, black powder paint finish - smooth finish to match our standard panels
• Requires mounting hardware

Louvered Panel

• Standard 19" rack mount
• Formed 16 gauge steel construction
• Includes a 0.50" fold, top and bottom for added strength
• Designed with 3 columns of 4 inch wide louvers
• Louvers face out
• Powder paint finish - smooth finish to match our standard panels
• Requires mounting hardware

Slotted Steel Panel

• Standard 19" rack mount
• 14 gauge steel construction
• Slots are 0.25" x 1.0"
• Powder paint finish - smooth finish to match our standard panels
• Requires mounting hardware

Slotted Aluminum Panel

• Standard 19" rack mount
• 0.13" thick aluminum construction
• Slots are 0.25" x 1.0"
• Powder paint finish - smooth finish to match our standard panels
• Requires mounting hardware

Perforated Panel

• Standard 19" rack mount
• Folded (for extra strength) - 16 ga. steel construction
• Powder paint finish - smooth finish to match our standard panels
• Requires mounting hardware