Hammond Mfg. - Desk Top Rack Cabinets - Heavy Duty (RCHS Series)

click to enlarge

Features:

Heavy duty, 16-gauge steel, 19” table top rack cabinet...

For ventilated versions link to our RCHV series...

Panel rails are infinitely adjustable (front to back), round hole punched for 10-32 clip-nuts to full EIA hole centers (5/8 - 5/8 - 1/2 inch spacing)...

Includes two pairs of rails (for rear support of heavier equipment), rubber feet, black ABS plastic handles, a starter pack of 10-32 clip nuts & matching 1421ABK black screws...

Supplied unassembled (four cabinet pieces & four rails), shipped in a flat pack container for handling ease & protection (see photo below)...

Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included)...

Overall width 21”...

Overall height 2” over panel space...

Front & back lip is .585" so usable depth is reduced by 1.17"

Recommended maximum weight (RCHS1902824 tested) - 800 pounds...

Rugged textured grey/beige, black or blue powder paint finish.

If your looking for information on the old version - RCHS link here (no longer manufactured).

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Number of Clip Nuts Included	Wt. lbs.
Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Inches	Units	Number of Clip Nuts Included	Wt. lbs.
RCHS1900817BK1 RCHS1900817CG1 RCHS1900817GF1	Black Gray/Beige Blue		63K		59K	8.75	5	8	28
RCHS1901017BK1 RCHS1901017CG1 RCHS1901017GF1	Black Gray/Beige Blue		60K		61K	10.50	6	16	28
RCHS1901417BK1 RCHS1901417CG1 RCHS1901417GF1	Black Gray/Beige Blue		64K		60K	14.00	8	16	30
RCHS1901717BK1 RCHS1901717CG1 RCHS1901717GF1	Black Gray/Beige Blue		67K		63K	17.50	10	16	32
RCHS1902217BK1 RCHS1902217CG1 RCHS1902217GF1	Black Gray/Beige Blue		70K		65K	22.75	13	16	38
RCHS1902817BK1 RCHS1902817CG1 RCHS1902817GF1	Black Gray/Beige Blue		72K		67K	28.00	16	16	42

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Number of Clip Nuts Included	Wt. lbs.
Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Inches	Units	Number of Clip Nuts Included	Wt. lbs.
RCHS1901024BK1 RCHS1901024CG1 RCHS1901024GF1	Black Gray/Beige Blue		68K		60K	10.50	6	16	28
RCHS1901424BK1 RCHS1901424CG1 RCHS1901424GF1	Black Gray/Beige Blue		64K		60K	14.00	8	16	32
RCHS1901724BK1 RCHS1901724CG1 RCHS1901724GF1	Black Gray/Beige Blue		64K		60K	17.50	10	16	43
RCHS1902224BK1 RCHS1902224CG1 RCHS1902224GF1	Black Gray/Beige Blue		66K		60K	22.75	13	16	50
RCHS1902824BK1 RCHS1902824CG1 RCHS1902824GF1	Black Gray/Beige Blue		82K		60K	28.00	16	16	56

31.5" Deep models:

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Panel Height		Number of Clip Nuts Included	Wt. lbs.
Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Inches	Units	Number of Clip Nuts Included	Wt. lbs.
RCHS1901031BK1 RCHS1901031CG1	Black Gray/Beige		62K		54K	10.50	6	16	28
RCHS1901431BK1 RCHS1901431CG1	Black Gray/Beige		63K		54K	14.00	8	16	32
RCHS1901731BK1 RCHS1901731CG1	Black Gray/Beige		63K		53K	17.50	10	16	43
RCHS1902231BK1 RCHS1902231CG1	Black Gray/Beige		65K		53K	22.75	13	16	50
RCHS1902831BK1 RCHS1902831CG1	Black Gray/Beige		66K		54K	28.00	16	16	56

Feature Views:

Ships Flat For Handling Ease & Protection	Interior View With Infinitely Adjustable Panel Rails
click to enlarge	click to enlarge
Panel Rails (Two Pair Included) With 10-32 Black Clip Nuts & Mounting Hardware
click to enlarge

Accessories:

click to enlarge

Casters - Part Number 1425PHD

SOLD IN A SET OF 4
Base of cabinet is punched to accept this caster set
600# Mfg's specified weight capacity (Set of 4)
Features ball bearing swivel and hard composition wheels
Small foot print 2.125" x 15/16" hole mounting pattern
Wheels are grey & 2" wheel diameter (adds only 2.5" to overall rack height).
Includes mounting hardware

(click to enlarge)

Doors

16-gauge steel construction
Front & back of "RCHS" rack cabinet is punched to accept these doors
Mounts either right or left hand hinge (door & cabinet are symmetrical)
Includes installed lock and two keys
Finished in rugged textured powder paint
Includes mounting hardware

Part Number	Color	Reader File	Drawing File Size	AutoCAD .dxf File (zipped)	.zip File Size	Use With Cabinet Panel Height
RCHD1908BK1 RCHD1908CG1 RCHD1908GF1	Black Gray/Beige Blue		17K		17K	8" (5 U)
RCHD1910BK1 RCHD1910CG1 RCHD1910GF1	Black Gray/Beige Blue		18K		18K	10.5" (6 U)
RCHD1914BK1 RCHD1914CG1 RCHD1914GF1	Black Gray/Beige Blue		19K		20K	14" (8 U)
RCHD1917BK1 RCHD1917CG1 RCHD1917GF1	Black Gray/Beige Blue		21K		22K	17.5" (10 U)
RCHD1922BK1 RCHD1922CG1 RCHD1922GF1	Black Gray/Beige Blue		22K		24K	22.75" (13 U)
RCHD1928BK1 RCHD1928CG1 RCHD1928GF1	Black Gray/Beige Blue		24K		27K	28" (16 U)

click to enlarge

Extra Panel Rails

RCHS rack cabinets ship with two pair - order below for extra mounting capabilities
Sold in pairs
Finished in rugged black textured powder paint
Includes amhal strut mounting hardware (black clip nuts are not included)

Part Number	Use With Cabinet Panel Height
RCHR1908	8" (5 U)
RCHR1910	10.5" (6 U)
RCHR1914	14" (8 U)
RCHR1917	17.5" (10 U)
RCHR1922	22.75" (13 U)
RCHR1928	28" (16 U)

click to enlarge

Extra Spring Nuts - Part Number 1421SN

1/4 - 20 Strut nut
1/4 - 20 x 1/2 bolt
Used only in our RCHS & RCHV table top rack cabinets - handy for mounting of other equipment to the horizontal struts
Sold in packages of 8 (8 spring nuts and 8 bolts) as shown

click to enlarge

Replacement Rubber Feet - Part Number 1421RC24

RCHS rack cabinets ship with four feet included - order these for replacement
Sold in package of 20