Hammond Mfg. - Table Top Rack Cabinets - Heavy Duty

click to enlarge

Features:

Heavy duty, 16-gauge steel, 19” rack mount - table top cabinet.

Ventilated on both sides & optimized per size to allow natural air convection.

For solid side versions link to our RCHS series.

Choice of three depths - 17.5" (444 mm), 24.5" (622 mm) and 31.5" (800 mm).

Panel rails are infinitely adjustable (front to back), round hole punched for 10-32 clip-nuts to full EIA hole centers (5/8 - 5/8 - 1/2 inch spacing).

Includes two pairs of rails (for rear support of heavier equipment or shelves), rubber feet, black ABS plastic handles, a starter pack of 10-32 clip nuts & matching 1421ABK black screws.

Supplied unassembled (four cabinet pieces & four rails), shipped in a flat pack container for handling ease & protection (see photo below).

Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).

Overall width 21” (533 mm).

Overall height 2” (51 mm) additional over panel height.

Front & back lip is .585" (14 mm) so usable depth is reduced by 1.17" (30 mm).

Recommended maximum weight (RCHV1902824 tested) - 800 pounds (364 kg).

Rugged textured powder paint finish.

Stocked in Black & Light Gray (RAL7035).

Catalog pages (2) on this series
Adobe Reader .pdf format (295K)

Part Number	Color	Reader File	AutoCAD .dxf File (zipped)	3D Solid Model .stp files (zipped)	Panel Height		Number of Clip Nuts & Screws Included	Weight
Part Number	Color	Reader File	AutoCAD .dxf File (zipped)	3D Solid Model .stp files (zipped)	Inches	Units	Number of Clip Nuts & Screws Included	Weight
RCHV1900817BK1 RCHV1900817LG1	Black Light Gray	422K	127K	233K	8.75	5U	8	36# (16.4 kg)
RCHV1901017BK1 RCHV1901017LG1	Black Light Gray	401K	130K	244K	10.50	6U	16	40# (18.2 kg)
RCHV1901417BK1 RCHV1901417LG1	Black Light Gray	441K	168K	312K	14.00	8U	16	44# (20 kg)
RCHV1901717BK1 RCHV1901717LG1	Black Light Gray	437K	189K	329K	17.50	10U	16	46# (20.9 kg)
RCHV1902217BK1 RCHV1902217LG1	Black Light Gray	449K	200K	342K	22.75	13U	16	52# (23.6 kg)
RCHV1902817BK1 RCHV1902817LG1	Black Light Gray	455K	203K	349K	28.00	16U	16	58# (26.4 kg)

Part Number	Color	Reader File	AutoCAD .dxf File	3D Solid Model .stp files (zipped)	Panel Height		Number of Clip Nuts & Screws Included	Weight
Part Number	Color	Reader File	AutoCAD .dxf File	3D Solid Model .stp files (zipped)	Inches	Units	Number of Clip Nuts & Screws Included	Weight
RCHV1901024BK1 RCHV1901024LG1	Black Light Gray	432K	148K	288K	10.50	6U	16	52# ( 23.6 kg)
RCHV1901424BK1 RCHV1901424LG1	Black Light Gray	483K	201K	399K	14.00	8U	16	56# (25.5 kg)
RCHV1901724BK1 RCHV1901724LG1	Black Light Gray	483K	211K	411K	17.50	10U	16	60# (27.3 kg)
RCHV1902224BK1 RCHV1902224LG1	Black Light Gray	429K	224K	424K	22.75	13U	16	68# (30.9 kg)
RCHV1902824BK1 RCHV1902824LG1	Black Light Gray	434K	232K	434K	28.00	16U	16	76# (34.5 kg)

31.5" (800 mm) Deep Models

Part Number	Color	Reader File	AutoCAD .dxf File	3D Solid Model .stp files (zipped)	Panel Height		Number of Clip Nuts & Screws Included	Weight
Part Number	Color	Reader File	AutoCAD .dxf File	3D Solid Model .stp files (zipped)	Inches	Units	Number of Clip Nuts & Screws Included	Weight
RCHV1901031BK1 RCHV1901031LG1	Black Light Gray	433K	164K	329K	10.50	6U	16	64# (29.1 kg)
RCHV1901431BK1 RCHV1901431LG1	Black Light Gray	496K	238K	489K	14.00	8U	16	70# (31.8 kg)
RCHV1901731BK1 RCHV1901731LG1	Black Light Gray	489K	253K	499K	17.50	10U	16	72# (32.7 kg)
RCHV1902231BK1 RCHV1902231LG1	Black Light Gray	495K	268K	520K	22.75	13U	16	80# (36.4 kg)
RCHV1902831BK1 RCHV1902831LG1	Black Light Gray	532K	290K	528K	28.00	16U	16	92# (41.8 kg)

Feature Views:

Ships Flat For Handling Ease & Protection	Interior View With Infinitely Adjustable Panel Rails
click to enlarge	click to enlarge
Panel Rails (Two Pair Included) With 10-32 Black Clip Nuts & Mounting Hardware
click to enlarge

RCHV Accessories

click to enlarge

Casters - Part Number 1425PHD

SOLD IN A SET OF 4
Base of cabinet is punched to accept this caster set
600# (273 kg) manufacturers specified weight capacity (Set of 4)
Features ball bearing swivel and hard composition wheels
Small foot print 2.125" (54 mm) x 15/16" (24 mm) hole mounting pattern
Wheels are grey & 2" (51 mm) wheel diameter - adds only 2.5" (64 mm) to overall rack height.
Includes mounting hardware.

click to enlarge

Locking Doors

16-gauge steel construction
Both front & back of "RCHV" rack cabinets are punched to accept these doors
Mounts either right or left hand hinge (door & cabinet are symmetrical)
Includes installed lock and two keys
Finished in rugged textured powder paint to match RCHS/RCHV enclosures
Stocked in Black & Light Gray (RAL7035).
Includes mounting hardware

Part Number	Color	Reader File	AutoCAD .dxf File (zipped)	Use With Cabinet Panel Height	Weight
RCHD1908BK1 RCHD1908CG1 RCHD1908LG1	Black Beige Light Gray	17K	17K	8.75" (5U)	5# (2.3 kg)
RCHD1910BK1 RCHD1910CG1 RCHD1910LG1	Black Beige Light Gray	18K	18K	10.5" (6U)	5# (2.3 kg)
RCHD1914BK1 RCHD1914CG1 RCHD1914LG1	Black Beige Light Gray	19K	20K	14.0" (8U)	6# (2.7 kg)
RCHD1917BK1 RCHD1917CG1 RCHD1917LG1	Black Beige Light Gray	21K	22K	17.5" (10U)	7# (3.2 kg)
RCHD1922BK1 RCHD1922CG1 RCHD1922LG1	Black Beige Light Gray	22K	24K	22.75" (13U)	9# (4.1 kg)
RCHD1928BK1 RCHD1928CG1 RCHD1928LG1	Black Beige Light Gray	24K	27K	28.0" (16U)	12# (5.5 kg)

click to enlarge

Extra Panel Rails

RCHV rack cabinets ship with two pair - order below for extra mounting capabilities
Sold in pairs
Finished in rugged black textured powder paint
Includes amhal strut mounting hardware (black clip nuts are not included)

Part Number	Use With Cabinet Panel Height	Weight
RCHR1908	8.75" (5U)	1.4# (0.6 kg)
RCHR1910	10.5" (6U)	1.7# (0.8 kg)
RCHR1914	14.0" (8U)	2.1# (1 kg)
RCHR1917	17.5" (10U)	2.5# (1.1 kg)
RCHR1922	22.75" (13U)	3.4# (1.5 kg)
RCHR1928	28.0" (16U)	4.2# (1.9 kg)

click to enlarge

Extra Spring Nuts - Part Number 1421SN

1/4 - 20 Strut nut
1/4 - 20 x 1/2 bolt
Used only in our RCHS & RCHV table top rack cabinets - handy for mounting of other equipment to the horizontal struts
Sold in packages of 8 (8 spring nuts and 8 bolts) as shown

click to enlarge

Replacement Rubber Feet - Part Number 1421RC24

RCHV rack cabinets ship with four feet included - order these for replacement
Sold in package of 24

Universal Accessories