15 Amp Zap Traps (ZT Series)

Path: Home > Outlet Strip Index > 15 Amp. Industrial / Commercial Grade - Zap Traps

Designed to be our highest level of surge protection 2,000 Joule Rating!

• Five stages of protection.
• Protection in all three AC modes and diagnostic monitoring with 3 LEDs.
• Red LED fault indicator identifying power outlet problems of open or poor grounding, line neutral reversal, excessive ground to neutral.
• Available with or without (see tables below) long-life superior telco-protection circuit. Single line circuit featuring delta protection with three long life semiconductor suppressors. Components FCC part 68 rated to 175 amps clamping at 145V, crowbar at 180V and fused to isolate sustained faults.
• Heavy 14 gauge 6’ wire cord.
• Mounting feet (with keyhole slots) allow temporary work station mounting if desired.
• 14/3 SJTW cord for extreme temperature ranges and integral molded plug.
• Rugged aluminum housing, 15 amp resettable breaker, available in 4, 6 or 8 AC receptacle models, on/off switch.
• Self-healing gas discharge tube protection rated at a minimum of 2,000 joules! Crowbar primary protection to 30,000 amps for sustained faults.
• 24,000 amps maximum transient current.
• Response time of less than 1 nanosecond.
• Voltage suppression at the outlet guards against transients from equipment on the power bar.
• CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)

Part No.	No. of Outlets	EMI/RFI Min.Noise Attenuation	Diagnostics	Telco Protection	Reader File	AutoCAD .dxf & .dwg Files (zipped)
ZT1001-4	4	80 db	Yes	No	21K	320K
ZT1001-6	6	80 db	Yes	No	21K	321K
ZT1001-8	8	80 db	Yes	No	21K	322K
ZT2001-4	4	80 db	Yes	Yes	21K	321K
ZT2001	6	80 db	Yes	Yes	21K	322K
ZT2001-8	8	80 db	Yes	Yes	22K	323K

catalog pages on this series (147K) PB0922.pdf

Order from your favorite distributor

HOME PAGE